-
The Laser on the BOM is 35mm length and can not be placed on the 3D printer design box. What is the correct laser?
-
Hey,
Really enjoy your library have used it for multiple projects.
For my next project I want to expand my gpio pins using a multiplexer. How would I assign the adresses to a button as they woul…
-
## Description
I am using [SVG Image Field](https://www.drupal.org/project/svg_image_field) module to show some nice icons. This causing error `InvalidArgumentException: Field field_media_image is un…
-
Hi,
I just got a Raspberry Pi 5 and am getting an error that my hardware revision is not supported.
Here is some hardware information from `cat /proc/cpuinfo`:
```
Hardware : BCM2835
Revision…
-
Hello,
I am trying to build an example for [Adafruit Qualia ESP32-S3](https://www.adafruit.com/product/5800) + [ Round RGB TTL TFT Display - 4" 720x720 - No Touchscreen](https://www.adafruit.com/pro…
-
At present, you can test the GPAD with [the code installed "at the Factory"](https://github.com/PubInv/general-alarm-device/tree/main/Firmware/GPAD_Factory_Test) (that we install on each unit), by pus…
-
### Is your feature request related to a problem? Please describe.
I have used this app a few times and it worked pretty well for me. However, it can use a bit of UI polish and more discoverability b…
-
Make it possible to create custom parts and program your own logic:
1. Define the pins for the part (e.g., for an I2C sensor: GND, VCC, SCL, SDA, INT)
2. Write some code to implement the logic for…
urish updated
6 months ago
-
Contributing to this repository requires the author to request access first (in this same issue). We are new people every week.
While you wait for the approval, maybe you can read the guide about […
-
mame0232-203-ga141e416778
Got a bit further in Strata StudioPro (1.5.2), but hit another snag.
./mame maclc3 -ramsize 32M -hard1 maclc3.hdv
Ignoring MAME exception: fpgen_rm_reg: unimplemented …