-
По сути расширение #114. Предположу, что новый виток связан с обновлением прошивки.
Прикладываю два файла на разном железе от команды `ip a`. В названиях указано, какой интерфейс должен быть выбран…
-
@sklvjz: RP-PPPoE is now officially on GitHub: https://github.com/dfskoll/rp-pppoe
If you have improvements, please create a PR and archive your current repository.
-
```
In WAN >> Internet
Access Connection Type set to PPPoE and Fixed IP(IPCP) set to No
PPPoE working fine, but only with DNS servers automatically assigned by ISP,
and no way to use any other (like…
-
Hi,
Good day may i ask why the tx/rx bytes for any PPPoE connected client it's graph is always 0/0 yield to a flat graph, but for normal interface this work as advertise, thanks
-
We've observed an issue where, after a PPPoE reset, the CPE establishes a successful connection with Talaria but disconnects immediately. This occurs because the CPE receives a zero-byte packet from T…
-
```
Out put of route -n
X.X.X.X 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
172.16.16.0 0.0.0.0 255.255.255.252 U 0 0 0 eth2
10.10.1.0 0.0.0.0 255.255.…
-
Error building the firmware image
Server response: init
Please report the error message and request
Request Data:
{
"url": "https://sysupgrade.openwrt.org",
"revision": "r24012-d8dd03c46f",
…
-
Maintainer: @cshoredaniel
Environment: arm_arm1176jzf-s_vfp / brcm2708 / bcm2708 (Raspberry Pi B+) w/ OpenWrt 18.06.2
Description:
To allow pppoe-server startup, and also be configurable in Open…
-
@RushOnline: RP-PPPoE is now officially on GitHub: https://github.com/dfskoll/rp-pppoe
If you have improvements, please create a PR and archive your current repository.
-
```
What steps will reproduce the problem?
1. flash the ROM provided in this page:
https://code.google.com/p/openwrt-hiwifi/wiki/ProjectIntroduction
2. download
http://downloads.openwrt.org/barrie…