-
Hi there,
I tried to run this container on an Raspberry Pi 4. There seems to be ARM support but not for the ARM architecture of Raspberry Pi.
Is this even possible?
-
![DSC07091](https://user-images.githubusercontent.com/481677/214754797-a66c57e0-5ce7-4973-893c-6bef9c384635.jpeg)
## Basic information
- Board URL (official): https://www.raspberrypi.com/produ…
-
I've got go2rtc running on a Raspberry Pi 4, and everything seems to work well except that I'm unable to play content from more than one client at the same time. Each of them plays perfectly if used a…
-
I have a small problem, my configuration (see below) for building an sd-image tries to compile an older version of gtkwebkit
I'm am using nixpkgs-unstable, and the latest version of gtkwebkit is 2.46…
-
After the screen has been on for a few hours it goes in a power-saving mode or sleep mode and turns black.
I'm using a Raspberry Pi 5 with Raspberry Pi OS with desktop Debian 64bit.
Do you have an…
-
When I run the command Servo.py. I get the following error:
Now servos will rotate to 90°.
If they have already been at 90°, nothing will be observed.
Please keep the program running when installin…
-
Something happened and my integration doesn't work anymore, not one Victron device is recognized. I recently updated firmware on all 4 devices, 3 solar charger controllers and 1 shunt. Not sure this i…
-
I followed the steps of the manual but unfortunately the freshly downloaded container won't stay up for more than a few seconds.
`docker logs planka-planka-1` prints the following:
```
Node.js v1…
-
Does RGBtoHDMI support 4k/50hz/60hz when used with Raspberry Pi 4?
-
The trailcam unit consists of
1. Trailcam
The trailcam needs to be connected to the Pi Zero. This could be done via USB cable to read out the trailcam's SD card. Wireless is another option.
3.…