-
Hello, after my last channel was co-op closed few days ago from remote, i want to sweep all my funds and i get this message
FAIL: [lncli] rpc error: code = Unknown desc = unable to broadcast sweep …
-
Here are the logs:
Apr 06 13:29:04 raspberrypi homebridge[503]: [2018-4-6 13:29:04] [Guest Controller] Logging into Unifi Controller 10.0.1.24 8443
Apr 06 13:29:35 raspberrypi homebridge[503]: [20…
-
Hello to everyone.
Rivendell version: 3.2.0
System: Raspberry PI 4
I have connected to raspberry pi 4 USB sound card.
Sound card itself is recognized by the system, everything is OK.
But in Riv…
-
For some reason minitower_oled.service fails to start despite sysinfo.py running just fine when ran with `python /usr/local/minitower/sysinfo.py`
```
$ systemctl status minitower_oled.service
× mi…
-
Hi,
after installing the plugin at Homebridge the pi loops at startup and trying to get connected to Loxone.
Can anybody help? Here the log:
-- Logs begin at Mon 2020-04-27 18:17:01 CEST. -…
-
i am trying to install chatbot on a node-red installation on a raspberry. unfortunately i get the following error:
`2023-12-06T09:39:25.846Z Install : node-red-contrib-chatbot 1.2.4
2023-12-06T09:…
-
I'm using KNXtool from raspberry PI to send commands directly to the KNX bus(no other devices are connecting to the PI).
the problem is: when I unplug the raspberry from LAN (doesnt matter if inter…
-
Apr 28 16:27:05 raspberrypi homebridge[11300]: [4/28/2019, 4:27:05 PM] Loading 1 accessories...
Apr 28 16:27:05 raspberrypi homebridge[11300]: [4/28/2019, 4:27:05 PM] [Test] Initializing mi-flower-ca…
-
Hi guys,
Being trying this incredible project today, on RPi 3B+, and RPi4, with the most recent OS, and an old Jessie just in case, all the time I get the next:
> May 2 18:56:56 raspberrypi kerne…
-
Hi all,
I 'm using new's version of KNXD.
I have a SCN.IP000.02/.03 Interface non Secure.
In the knxd. config
KNXD_OPTS="-e 1.1.231 -E 1.1.210:19 -b ipt:XXX.XXX.XXX.XXX"
-e 1.1.231 free KNX …