-
Hi,
I have this switch http://www.harald-nyborg.dk/p3031/stikk-fjernbetjent-hvid-1609x which is extremely similar to Elro Home Control Funk Set / Brennenstuhl Comfort RCS 1000N and Arendo on the form…
-
I have the issue that ShellSensor and RFLinkData devices allow only the selection of Lightbulb and Switch in the hap configuration:
![grafik](https://user-images.githubusercontent.com/3192606/12312…
-
I recently started with connecting my rf devices to the internet using an arduino to copy the rf (decimal)singals and using a raspberry pi to send the singals. My rf light switches work great! but whe…
-
### Latest firmware used?
Latest firmware as suggested by https://github.com/arendst/Tasmota/wiki/Sonoff-RF-Bridge-433, which is https://github.com/arendst/Tasmota/blob/master/tools/fw_efm8bb1/RF-B…
-
Hi,
I have an MyFox HCPro Alarm, and I was happy to use your homebridge plugin until MyFox disable my access with the following reason :
> Too many tokens created (1613). Read again the documenta…
-
Will show latest received radio / error message.
Default antenna pin may change as I2C SCL/SDA are D1/D2 pins on D1 mini board.
-
I use this repository for my sensors BME280 with Attiny85. The first one works well but all others keep the same ID even if I change the ID value in the configuration.h file.
I always get an ID=5A20
…
-
Hi,
Probably a stupid question but for the life of me I can't figure out how to use the mqtt output. I've never used mqtt before and can't seem to find a sample setup that I can understand.
I'm…
-
Hello,
tryed your code, but the covers only respond to the prog command.
but the rest isn't working, what could be wrong ?
```esphome:
name: somfy
platform: ESP32
board: nodemcu-32s
…
-
Not wanting to hijack an existing issue (like https://github.com/RainerStaude/hass-becker-component-plus-pybecker/issues/39), so opening a new one :sweat_smile:
I tried to setup my becker USB dong…