-
I've been experiencing freezes on the RFM 69 gateway and I do not understand what is wrong.
- version 2.3.2 of Mysensors,
- ESP32DOIT board
- espressif 1.12.4 (platform IO)
- Arduino framework…
-
I've been trying to send data from an RPi with RFM69HW attached (433MHz), but no matter what I try it seems that the two devices don't see each other. Are qbcans only able to communicate with other qb…
-
(also posted in the forum at https://forum.mysensors.org/topic/4836/new-internal-message-types/)
Since it's now possible to have sensors on the gateway and there seems to be a slight shift towards us…
-
Hi Jean-Emille!
I managed to compile (there was some error about RFM69 library not having the promiscuous mode defined but I downloaded v1.4.0 of the library and it worked. I think v1.4.2 doesn't h…
-
I'm using your GarageDoor example and I have it working but I am confused about one thing: In the very simple Python file I've included, the "GarageDoor" class's change_state() function gets called be…
-
It would be nice to attach a function to the ListenMode ISR from user space. As it stands right now the userland code has no way of knowing if a WDT ISR or ListenMode ISR triggered the wake up.
-
I am using Adafruit Feather M0 with LoRa module which has 915E6 frequency. I tried to work with provided solutions here but could not get any way to start my LoRa system
My module is: https://learn.a…
-
I'm struggling with my PR https://github.com/adafruit/circuitpython-org/pull/1408
This guide is outdated: https://learn.adafruit.com/how-to-add-a-new-board-to-the-circuitpython-org-website/adding-…
-
Any thoughts on what might be the best way to implement gust reposting in the AnemometerTX example with the limited 328 ram?
ghost updated
2 years ago
-
Hi i am using your code, data sending part seems working and able to debug( prints Flags1: 0 Flags2: 0), but on receiving side unable to debug, not receiving anything, MinimalInterruptUnoDIO0 example …