-
Since the ognconfig tool will be discontinued, we need a new reference setup which doesn't require any prior knowledge of Linux.
An idea is to use [pi-init2] and a (debian-)packaged version of rtls…
-
Hi
I'm using dump1090-fa to retreive raw data from tcp/30003 stream (SBS format / BaseStation)
I've noticed that sometimes there's a problem with the reported callsign: In rare cases I get the c…
-
I have been trying to BladeRF x115 work with SDRSharp without any luck. I tried with both a windows7 and a windows 10 machine but couldn't get it to work. I followed the following youtube link first.
…
-
Hi all
**Kismet 2020-04-R3
5.6.0-kali2-amd64
AWUS036ACH**
Started kismet server, data sources is ok, wi-fi card is running in monitor mode, but 0 packets capture and no data available at all, …
-
Hi,
When using scan mode, AM modulation, with a walkie talkie to send the am signal. RTLSDR-Airband has saved the mp3 file. But there is no sound when playing the mp3. If the mode comes to NFM, ev…
-
If you request a sample rate that is not supported by the hardware, then no error is reported but the sample rate is not used.
There's no error checking or validation done at either the point of ca…
-
Hi.
Thanks for your amazing work.
I perfectly initialize and setup rtl-sdr and its dependencies.
when I run the test.py file as I mention below it did ok till I got the following error:
Configur…
-
In case of use `File -> Save as` option. The Scanner utility declares the "Status: Saving..."
But when I run the first examp…
-
MacOS 13.6.7
Python 3.12.4
Numpy 1.26.4 (2.0.0 doesn't seem to be working)
Using Python venv. Had to manually install `setuptools` with pip. Manually installed `pyrtlsdr[lib]` with pip. Installed…