-
Hello all,
I am currently at an impasse. I need to configure a second WiFi interface (RLT8188eus USB key) in order to be able to connect an external antenna.
I'm working on :
Linux KaliDiver 5.6.0-…
-
Hi,
I am noticing a significant difference in the amount of information that is being decoded. For a lot of aircraft the lat/lon is never populated whereas when using view1090 from dump1090_fa, I c…
-
Hi sir,
I tried to install grgsm on mu raspberry pi 2, and firstly I ran "kal -s GSM900 -g 40",i have got the result:
![qq 20170306210823](https://cloud.githubusercontent.com/assets/15179223/2361…
-
root@kali:~# grgsm_scanner
root@kali:~# sudo python3 simple_IMSI-catcher.py --sniff
python3: can't open file 'simple_IMSI-catcher.py': [Errno 2] No such file or directory
root@kali:~# grgsm_livem…
-
If the software detects a probe, the decoder remains attached to this probe.
But as there are many probes in the air it would be good if the decoder could jump to the next probe after a few seconds.
-
Honeywell sensors work to about 25' of RTL-SDR with 7" telescoping antenna near ceiling.
RTL-SDR: [https://www.amazon.com/RTL-SDR-Blog-RTL2832U-Software-Telescopic/dp/B011HVUEME/ref=sr_1_3?ie=UTF8&…
-
When I invoke the application I see flashes of errors that clear away quickly before they can be read and I see text staircasing. In an attempt to calm the output I piped the output into strings so …
-
Since learning that SoapyRemote is a native part of the SoapySDR stack, I've started trying to test using an Airspy receiver connected to an RPi 4, with the intention of streaming the data over the ne…
-
Hi, i try to run the grgsm with my hackrf and get me this error: zsh: abort grgsm_scanner.
My hackRF has successfully installed and i can see that using the comand hackrf_info and i try to run t…
-
I've been able to create configuration files that apparently work with L1 C/A and L5 GPS, but so far I have not been able to create a configuration file that successfully acquires L2C. I've tried mod…