-
**Describe the bug**
When in PWM/SBUS mode, when using at FS-IA6B receiver, PWM is not being output from the receiver.
**To Reproduce**
Install OpenI6X v1.1.0 on FS-I6X
Bind with FS-IA6B (with …
-
Hi I’am new here. I was able to connect and fly on simulator by SBUS and arduino setup until it stopped working and vjoy serial feeder failsafed. How do I fix it? my transmitter and receivers are link…
-
I am planning to make a 2 in 1 sensor, GPS and MS5611 altimeter, and tried to use the new GPS module, and the test was successful, but after compiling the code with MS5611, it does not work. I also te…
-
Hello,
First of all thank you very much for all your efforts. I am using this tool on Windows without a problem. I am using it for connecting my Radiolink AT9S transmitter to simulators using SBUS …
-
## Current Behavior
After flashing a Happymodel EP2 receiver with ExpressLRS 1.1.0 and AUTO_WIFI_ON_INTERVAL activated, the RX deoesn't boot properly (solid LED even with TX off) and gets very hot …
-
I think we should add SBUS output protocol for some reason for using it easy. Because some Tiny FC don't have both TX and RX just only have RX
Is a good idea for enhancement ? Or just is a bad ide…
-
hello, i have a device FTL0102, can you build kext for it, thanks!
-
configure output:
```console
+ ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --disable-silent-rules --prefix=/usr --exec-…
-
Hi
In nightlies I now see when binding, the question about channel and telemtry is the same as it is in Open-Tx.
Binding without telemtry is ok channel 1-8, but in channel 9-16 the telemtry is still…
-
Next test:
Voltage and current values can be trimmed to a usable accuracy by adjusting the divisor and ampGain in escHW4.h useful accuracy by adjusting the divisor or ampGain. Remaining measurement …