-
I have replaced the Midea WiFi dongle with my own ESP8266 which acts as a serial bridge. I would like the midea-msmart software to support serial communication with the Midea unit without any of the s…
-
Upgrading Node from 18.8 to 20.9 causes plugin to crash - reverting fixes it.
[20/11/2023, 13:01:27] [InsteonLocal] Connecting to Insteon PLM...
/var/lib/homebridge/node_modules/homebridge-pla…
btgh updated
7 months ago
-
@mbalmer and I have spoken on the Matrix/Element that a feature enhancement for trx-control should include the ability for extension functions to be executed automatically by trxd without a separate t…
-
### Is your feature request related to a problem?
@lhespress (and @chshu) not sure if should post a request here or zigpy-espzb repo at https://github.com/lhespress/zigpy-espzb
Duplicate/cross-p…
Hedda updated
2 months ago
-
I am currently writing two bindings for different hardware pieces, both using serial line. I am looking at SonyProjector as a reference, and i see it implements multiple types of Bridge: serial, seri…
-
If I'm not mistaken, the ESP32-C6 (and the ESP32-C3) can enable a Serial Monitor by sending a command to the bootloader. Afterwards, serial output (e.g. `Serial.println("Hello!")`) could then be recei…
-
The ssid says ESP-XXXXX and the password is unknown. I used a new ESP8266 chip, but everything remains as it was at the beginning. Changing the network name and password is not possible. Use Arduino I…
-
First, thanks for your effort!
The tables with the vendor and product IDs all list CP210{1..4} the same, so the readme should advise on how to distinguish them. Even a negative acknowledgement like
…
-
Any chance you would consider adding a Zigbee serial API proxy/bridge and making a Telink radio library (in Python) for zigpy?
https://github.com/zigpy/zigpy
https://github.com/zigpy/zigpy-cli
…
-
Opening issue to discuss iOS GCS. There are solutions out there to create a TCPSerial bridge, https://github.com/beckdac/ESP8266-transparent-bridge as an example uses a $5 component.
[edit] GCS curre…