-
**Describe the bug:**
The LO input is 7dBm (1.4Vpp) with the ring mixer disconnected. This must be over the frequency range 8 to 155MHz.
**Steps to reproduce:**
Disconnect the mixer LO pin. M…
-
### What would you like to know?
Hi, hackrf one receives a rectangular pulse with a frequency of 10 MHz 3.3 V on CLK in, is it possible to reduce this frequency and apply, for example, a frequency of…
-
Probably this is just a basic setting problem,but I really cannot find assert.h and error.h.
When I compile an example, it says "fatal error: asserts.h: No such file or directory". Anything wrong wit…
-
I saw your NanoVNA open source project, this is a great project. I purchased the NanoVAN kit from China and learned to use it. I analyzed the circuit diagram and program code, but I still don't unders…
-
As title says.
Asked a friend to solder the clockgen (he makes boards for a kinda big factory, so he surely knows what he did)
got it back today, plugged it in and did not get any signal
opened…
-
I assembled the standard circuit, the same as the project (ILI9341 + ESP32WROOM32 + Si4735), however the display is not in the correct rotation, both vertically and horizontally it does not draw all t…
-
Starts failing to build with linux kernel 6.9 on my system. 6.8 was working correctly.
DKMS make.log for tbs_6904_se-6.9 for kernel 6.9.1-arch1-2 (x86_64)
Thu May 23 11:36:52 PM CEST 2024
…
-
Hello,
in Capture mode, or in Audio Trasmission, is possible to use external 10 MHz reference?
I'm trying with or without but I cannot notate difference. In HackRF mode, no problem
-
Helli there!
First time posting in here and im not english native speaker so please bear with me. Well about week ago i just finished making GBS-C and it was working great but... Everytime when i s…
-
Hello,
What modulation is supported by this firmware for APRS?