-
Spencer,
I have finished a new Main PCB (I’ll send pictures next). I am pretty confident that the soldering is adequate. I have a solid scintillator and SiPM combination. I have 29.4V at the SiP…
-
Spencer,
I have a good looking pair of PCBs, SiPM and Main. I have the appropriate current throughout. But no counts. I went through the Main PCB components again touching up the solder connecti…
-
Spencer, I am switching from your email to this account to declutter your life.
I have built two sets of SiPM and Main PCBs, and think I have them working. The voltages are correct, and there is…
-
After a week of operating my Detector reads .2847 with +/- .001. I didn’t see count guidelines in the repository materials (I easily could have missed it given my track record in building the Detecto…
-
Using Windows 10
error message:
[arduino_fail.txt](https://github.com/spenceraxani/CosmicWatch-Desktop-Muon-Detector-v2/files/2535908/arduino_fail.txt)
Also having difficulty sourcing LT3461A -…
-
Sensl was taken over by ON Semiconductors. Their website for purchasing a SiPM is no longer functional. I have so far not been able to reach ON Semiconductor to see if they well support selling small …
-
Hello,
A quick question on the performance difference between polished and unpolished scintillators.
I have built two detectors. I was not quite game enough to begin with to heat polish the scinti…
-
I've built two boards with the same issue, there is 0.4 V coming out of the DC-DC booster for the SiPM instead of 29.5 V. I've checked each component in the booster circuit, including the connections …
-
-
Looking for any tips, please. The main PCB is assembled and when I plug it in I see the LED blink once and the screen reports one measurement. from the instructions I was expecting a solid LED and a…