-
### The problem
Hello,
board: Lolin ESP32-S3
I'm trying to get the LED (WS2812) on the board to light up. But it doesn't want to compile with that exact pin(gpio 38).
Thanks in advance!
### W…
-
I'm working on a large scale project with 3844 total leds on sk6812 strips. using this library, I've been able to address up to about 2700 of them using GPIO 18 with PWM , but I was hoping to be able …
-
Hello!
Can you make the Rainbow Cycle effect for the preset?
It can Cycles a rainbow over the entire string of LEDs. Of course it is work only with digital leds (ws2811, ws2812)
I only like this …
-
Shouldn't the notch marker on the silkscreen layer be next to the ground pin instead of din?
![image](https://github.com/keebio/keebio-components/assets/41409702/ed9d4435-6ff3-4f38-bffc-5f309ed160b1)…
-
## Feature Request Type
- [ ] Add-on hardware support (eg. audio, RGB, OLED screen, etc.)
## Description
The nrf52 branch contains outdated RGB Matrix functionality. Since I have WS2812 LEDs …
-
### Description of the bug
Device info: NeoPixel Ring - 16 x 5050 RGBW LEDs w/ Integrated Drivers - Cool White https://www.adafruit.com/product/2856
I have the above ring LED light connected direc…
-
All builds and installs fine.
According to similar GPIO wiring works fine.
After hacking hardware detection in rpihw.c, /dev/vcio is not found.
Is there another way to get it working on BPi?
Thx.
-
Hello
I'm Strangistra and I work on a Adafruit Feather nrf52832.
I have a strange behavior with the Bluetooth connection.
I have a code to drive 4 RGB leds strips. For this I used the FastLed…
-
There's a bug with the 3 byte pixels, likely missing pushing a blank w pixel.
-
Can anyone help me to flash the firmware, especially the display.
The documentation is still in progress.
I tryed to upload with VS Code and PlatformIO but the board is in boot loop.
With my test…