-
In the last week, printing ended in error 3 times.
It is annoying when this happens after 5 hours of printing.
I print from SD card in TFT35 E3 v3.0
I have compiled the latest FW to TFT display
an…
-
I have been trying to setup marlin bugfix with my skr 1.4 T and TMC 2209, I got it to work with marlin mode, but when i went to TFT mode. some crazy stuff was happening, like nozzle crashing to the be…
-
My setup:
SKR mini E3 V2.0
Marlin 2.0.7.2 (Dec 3rd 2020)
TFT70 V3.0
TFT70 V3.0.26.X (Jan 5th 2021)
1. Persistent pop up
After automatically loading the filament, a pop up says "Paused for us…
-
### Description
If TFT is set to Marlin Mode (LCD Emulator/Simulator) and printer is reseted or power cycled, marlin does not boot, as soon as TFT is switched to touch mode marlin does boot up co…
-
Filament unload menue makes printer freeze
### Steps to reproduce
Power on at Touch Mode
Preheat
Preheat PETG
Move
(Un)Load
Temperature stays and not updating
Moves Head, but not unloading, …
-
### Description
TFT35 V3.0 Stop printing random when printing from TFT35 USB
### Steps to reproduce
1. Start to print
**Expected behavior**
Normal printing expected
**Actual behavior**…
Rodov updated
6 months ago
-
I am using the Touch screen TFT 50 V3.0 and when sending the M300 S440 P200 command
via the terminal or in the G-code file, no tone is heard.
When using the old display LCD 12864, everything is f…
-
**Bug Description**
After canceling a print the Hot end and Bed revert back to the pre-heat temp, in my case I had preheated for ABS. This is printing from the touch screen interface on the TFT35 E…
-
I have updated my TFT35 E3 V3 to the current version (TFT_E3_V3.0.26.1)
but now the colors of the LED Knob are completely gone.
no color is correct.
OFF also no longer works.
-
The Smart Filament sensor does not work when connected to the appropriate port on the display. It has been set in firmware. But there is no reaction. The thread jams. Printing goes on. There would alw…