-
```python
Mar 10 15:04:09 nuvd-DBO-08 python3[765]: INFO:smartsolar:Connecting to nearest VEDevice
Mar 10 15:04:15 nuvd-DBO-08 python3[765]: INFO:smartsolar:[c6:9c:53:9a:19:a1] Discovered VictronEne…
-
Victron Battery Sense reports as Battery Monitor and presents BATTERY_VOLTAGE and TEMPERATURE.
Orion Smart DCDC needs a filter on OUTPUT_VOLTAGE since it reports 0x7FFF=32767 when engine is off=Unava…
-
I'm new to VictronOS and Solar.
My setup: Two PV modules, Victron SmartSolar MTTP 150/35, battery with 3.5 KWH, Raspi with VictronOS, Hoymiles HM-600, Shelly 3em for the load indicator.
So far every…
-
Following fields available to report, the current Solar Input Watts and Total Yield Watts today
"model_name": "SmartSolar MPPT 75|15",
"solar_power": 0,
"yield_today": 20
-
Hi Jonas,
I installed your script on my Raspberry Pi 3 B+ and connected the Victron SmartSolar 100 30 via original USB-Cable to the Pi.
I can check the Version of the script and so on, but I can…
-
In VenusGX device in bigger installation, there are 5 pcs BMV-700 + 6 pcs MPPT BlueSolar /SmartSolar installed, by use of VE.direct -USB interfaces and active USB 3.0 HUB.
If JBD BMS with USB-RS48…
-
Hello, i'm working on a DC System in my Solarmotorboat. i don't have any AC Devices, just a Victron Smartsolar MPPT Controller and a 500a Smartshunt. i don't want to see the AC Controller on my Dashbo…
-
Hallo,
Was bedeutet der Fehler 147?
Bitte um Hilfe.
Gruss und Danke
Daten:
Bulltron Lifepo 200A
Daly BMS
Batterycode SH39F003
Softwareversion 0044
Mit "dummy" funktioniert es. Am HA oder…
-
I have one SmartSolar MPPT VE.Can 250/100 rev2. If I activate NR_OF_MPPTS = 1 the logfile shows the following error:
INFO:root:2023-03-22 14:35:26.117637: Searching batteries: Trial Nr. 1
INFO:roo…
-
I use a Daly 8S 150A BMS and using the newest prerelease 12b2.
The new cell voltages view displays the correct battery voltage. However, in the Remote Console overview as well as in the Victron VRM…