-
Hi,
I'm trying to program with pyupdi an Attiny817 on a Attiny-Explained-M demoboard (http://ww1.microchip.com/downloads/en/DeviceDoc/50002657A.pdf);
I'm using Python 2.7 on a Linux machine and wh…
-
I see some bits in the code that mention the 404 but how do I specify it to write the eeprom? I flashed your precompiled main.hex and I'm flashing 1f:7f
-
Currently I only have access to STCGAL and have been using -t to set the frequency to 22.1184Mhz. The result is a very bright white display that appears to refresh digits after maybe 100ms.
Do you…
-
IMO, the current name of this program is a bit unfortunate. It is nearly the same name as the earlier Chrome app "stm-serial-flasher". Also "serial" doesn't mean that much, as pretty much any method t…
-
**In raising this issue, I confirm the following:** `{please fill the checkboxes, e.g: [X]}`
- [x] I have read and understood the [contributors guide](https://github.com/pi-hole/pi-hole/blob/master…
-
希望能改进下~
例如: 1.c
```
int a;
void foo(...) {
int b = p;
}
```
`wgtcc -S 1.c`
```
1.c:2:10: error: expect type specifier
void foo(...) {
^
```
`7cc -S 1.c`
```…
-
please can you or any other people suggest some windows software to compile and flash ??
a little how to for windows users would be nice too :+1:
many thanks for your work!
-
I purchased http://www.ebay.com/itm/152077409965 and on a whim decided to load this firmware onto it, which has turned out badly for the device.
I can't find a datasheet for this processor, so this m…
hachi updated
7 years ago
-
Hi
Firstly, this repository is really cool. Fantastic work.
I have a [similar ebay clock](http://www.ebay.co.uk/itm/DIY-kit-LED-electronic-clock-microcontroller-LED-digital-watch-time-thermometer-/1…
-
usb to serial chip is CH340T
Sakura:stcgal-1.2 Earture$ python3 ./stcgal.py -p /dev/cu.wchusbserial1420 -P stc15 test.ihx
Waiting for MCU, please cycle power: done
Target model:
Name: STC15F2K60S2…