-
I've looked hard and far and this is by far the best library for inverse kinematics with Johnny-five. I'm currently building a robotic arm with the use of Johnny five, however, I'm using stepper motor…
-
I'm unsure what is causing it, but I can only now successfully home my machine if I disable tmc_autotune for the X and Y motors. This used to work prior to updating today. Here's the relevant parts of…
-
I today received my first PandaPi and I was attemping to test it, but I'm having the following problem now:
The Steper motor that is connected to the extruder port is making a really louse hissing …
-
Need KiCAD files of our own version of https://www.pololu.com/product/1182 carrier board
We have ancient never fabricated old kicad files at https://github.com/rusefi/rusefi-hardware/tree/main/A498…
-
Hi!
Im working on a cartesian printer with stepper motors and linear optical encoders to close the loop. Im new in all about the firmware, so there are so many files and my issue is to find or create…
-
Hello,
I'm building my own 3d printer. and i need a little help how can i calculate the Stepper Motor Current value.
I ordered SKR Mini E3 V2.0 Board, and Nema17 Stepper Motor 17HS4401 stepper…
-
Hello - I'm testing the TMC2209 BIGTREETECH v 1.3 drivers without UART config and no matter which microstepping option I set via MS1/MS2 pins or what potentiometer value I set (tested max clockwise / …
-
Using this in config:
```
[autotune_tmc stepper_x]
motor: ldo-42sth48-2004mah
extra_hysteresis: 4
[autotune_tmc stepper_y]
motor: ldo-42sth48-2004mah
extra_hysteresis: 4
[autotune_tmc ex…
-
hello there
i dont have any programming knowledge
could any one help me how to set stepper motor as spindle in GRBL library?
-
Ordered for testing:
**Drivers:**
[A4988](https://www.amazon.com/gp/product/B07BND65C8/)
[TMC2209 V1.3](https://www.amazon.com/gp/product/B07ZPYKL46/)
[DM556](https://www.amazon.com/gp/product/B…