-
**Describe the bug**
This is a bug that I noticed while reading code. I haven't actually reproduced this bug (I do not have applicable hardware read), but I'm pretty confident it exists.
The probl…
-
Hello guys, I tested yesterday the branch and all seems to compile succesfully as it is, but I have some old Heltec_wifi_lora v1 boards, so I wanted to try those, I change these lines:
```
[env:esp3…
-
I am back, as I am stuck again. I am have now used the following code, mostly a copy-paste of the receive with interrupt example in GitHub. To my surprise without transmitter the module is constantl…
-
This issue arises out of the discussion regarding the recent addition of an implementation to support the Semtech sx126x LORA chips:
https://github.com/embassy-rs/embassy/pull/985#discussion_r98356…
-
Question: How to convert RSSI of float to RSSI of uint16_t?
I choosed sx1302 to Gateway and sx1261 to nodes in Lora network.
I could get this int16_t format of RSSI in the codes of sx1261. For ex…
-
**Describe the bug**
Under RadioLib 5.6, the following sketch successfully sends via a Heltec LoRa32 v3 SX1262. It is received successfully via a TTGO OLED LoRa v1 (SX1276) but the RSSI is ~120. When…
-
Hello,
I am trying to use this package for the SX1261/1262 with the Pico, but I am having a hard time trying to figure out how to get it to compile safely for the SX1262 instead of the SX1276; is t…
-
This has originally been raised by @zigon - just creating an issue for this as nobody else has after checking repo issues.
**Description**
I have a gateway and a critical device that I need reli…
-
I have checked that, with some fast CPU devices and the Ra-01SC module (LLCC68), the "begin" method can return an error because the LLCC68 cannot initialialize between the sx126x_reset and the send of…
-
I'm getting incorrect reads from GetDeviceErrors with LLCC68.
The library is sending 0x17 byte, as expected, but it must read 3 bytes from the response, but in sx126x_getDeviceErrors it is only readi…