-
#### What were you doing?
I am trying to switch a TP-Link HS110 via the OctoPrint Webinterface by the PSU-Control-Plugin.
1. I installed PSU Control and PSU Control TP-Link Plugins
2. I…
-
### The problem
I have 2 TP-Link HS110 Smart Plugs to manage the living room heater and the bedroom heater. Booths are connected to my HA using the built-in integration.
In the last 6 months, ther…
-
### Current Behavior
31 Jan 11:30:21 - [error]
********************************************************************
Unexpected Node Error
TypeError: Cannot read property 'log' of undefined
at…
-
### The problem
After updating from 2021.8.0b1 to 2021.8.0b4 all my 3 TPLink sockets stopped working (I'm using TPLink HS110 model).
On 2021.8.0b1 everything worked fine.
On the page IP:8123/c…
-
### The problem
Since the update from 2021.7.x to 2021.8.1, i get the following error:
Logger: homeassistant.components.websocket_api.http.connection
Source: components/websocket_api/connection…
pimw1 updated
3 years ago
-
### The problem
https://community.home-assistant.io/t/tp-link-kasa-slow-after-2021-8-2-and-ha-non-responsive/327599
I have 36 devices 51 entities in my TP-Link Smart Home integration. This has wor…
-
### The problem
Very frequently (up to 1-2 times per day), a smart plug connected through the TP-Link Kasa Smart integration is appearing as unavailable. The plug is accessible through the dedicated …
-
### The problem
Calling service `light.turn_on` with a TPLink HS220 using either `brightness_pct` or `brightness` values will set the turn-on brightness level but **will not** actually turn on the …
-
**Describe the bug**
See attached picture, I think the upper brace (sun+grid) is shown correct,
but the green bar is too long. Green bar shows 1.8kW sun, but the legend on the left says only 1.5kW.
…
msome updated
2 years ago
-
Morning mate. I have the same Arlec RC210 model (bought from Bunnings in AU) and I have Raspberry Pi connected to 433MHz Receiver/Transmitter.
I've been trying to use the same binary codes as yours a…