-
Is this kWh?
{"power": 304.581534, "total": 0.879, "current": 4.13536, "voltage": 121.355707, "err_code": 0}
-
Just bumped my HA install to 0.7.6 for P304M support. Energy metering on the child devices and switches are discovered on parent but looks like there is still an issue with the Current Power sensors o…
-
There is odd behavior when running maaspower. Every other request fails with the following stacktrace. I tested this on Ubuntu 22.04 and Ubuntu 24.04. I also tested the package from PyPI and the lates…
-
When I include the Kasa EP40 via FPP command TPLink Set Switch into my playlist to either turn on or turn off, FPPD crashes and stops. I have 3 EP25's installed and they run without issues. It is only…
-
There are 2 formats for messages, what I am calling "long" and "short" format. They seems to be kind of mixed, and support for the different types overlaps sometimes (but not always.) Like some devic…
-
Thanks for making this wonderful app.
The night mode is working well for my HS200 and the HS210 switch. However the dimmer switch (HS220 V2) night mode slider would goes back to "off" after couple s…
-
When sending 'on' and 'off' commands to the kasa node with 192.168.68.144/0 it will also turn on the other plugs 192.168.68.144/1 and 192.168.68.144/2 at the same time.
This behavior did not happen w…
-
I was not aware that these had an automatic firmware update but it is only what I can assume has happened. I have some HS100 devices that present at hardware version 4.1 (I have other that are 2.0 an…
-
### The problem
Pydantic released v2 of their library. Some libraries want to utilize the new features of Pydantic v2 so HA should update to Pydantic v2. To not burden all libraries to rework, [Pyd…
-
### Expected Behavior
With solid network connectivity and unchanged IP addresses, I expect that state should be reported correctly and there should not be TCP timeouts.
### Current Behavior
I…