-
Hello, I'm trying to use [LilyGO T-CAN485](https://github.com/Xinyuan-LilyGO/T-CAN485) to connect to a DC Battery CAN BUS. I'm trying to figure out how to customize the ESP32RET.ino to work with thi…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Feature description
I would like to be able to apply a security group to either an EC2 instance, load balancer…
-
Hi,
Is it possible to resize the GUI to actual aspect ratio with respect to the video?
Thanks.
-
By testing 3WIRE protocol with the new firmware U_1-28102018 I built (http://dangerousprototypes.com/forum/viewtopic.php?f=28&t=8498&start=105#p67796) I found the same issues as for I2C SOFTWARE proto…
-
Hi guys,
Thank you for this project. I am looking to control my base from Alexa or just a simple arduino however my base is the following kind:
https://www.mattressfirm.com/mattress-firm/600-adj…
-
Channel 0 RXD ( or TX from the Kickr) seems to follow 7 bytes (correct term?), pause about 0.3 seconds, then 0xA2, pause about 0.6 seconds, another 7 bytes, pause, 0xA2, etc. Edit: though occasionally…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Current Behavior
When executing dbt run for the AWS Compliance pack 12 out of the 13 models complete. aws_com…
-
Hi again,
Long time passed but, as you might remember i rolled my own hardware based on your "15s80" and "switch n sense" in here: https://github.com/LibreSolar/bms-15s80-sc/issues/6
I solved all…
-
Hey Haata,
Thanks for putting in the time to get this project off the ground! I hated having to keep a windows vm around to run lab scripts!
One thing i've noticed is that I don't seem to be able t…
-
Thanks for creating an issue! But first: did you read our community guidelines?
https://cuckoo.sh/docs/introduction/community.html
##### My issue is:
i submitted the .exe Malware sample then the …