-
Hi Adam et al.,
I have one CANBED DUAL hanging around and decided to put it in something useful. I had doubts, (confirmed), that it won't work with your code without some intervention and augmentat…
-
The icons used at present I really consider placeholders, because:
- They're inconsistent in style
- They're inconsistent in size
- The injury ones should (IMO) be colour coded to match the colours we…
-
Following up from a community thread: https://community.openhab.org/t/z-wave-dimmer-restore-last-value-setting/25808
The binding should poll a dimmer device for its final value when the "restore la…
-
A button device that has been successfully flashed with this firmware has a problem during use. In the same zigbee2mqtt network, when the button switch is turned on and off, the A switch([QBKG41LM](ht…
-
```
Here is how to make chatpad work on a Xbox360 wireless controller:
All the data below has to be send to endpoint 1 (assuming endpoint 2, 3, 4 for
controller 2, 3, 4). The chatpad will return dat…
-
The greenwave environment could come pre-configured with the ability to increase the number of lanes. This would help users with questions like these: https://stackoverflow.com/questions/57461233/incr…
-
So every time I turn on my controller, it shows the blinky light forever unless I pair it by holding down the XBOX button and the button on the dongle at the same time.
-
From Lance B:
Jen discovered a discrepancy between the flash status on the Traffic Signal Monitor page (http://transportation.austintexas.io/signals-on-flash/#) and our actual flash status in KITS.…
-
Right now KompleteSynthesia does not support MK3 devices. Information on their details are scarce. No open-source project seems to have reverse engineered the needed information from those. It should …
tillt updated
1 month ago
-
### What happened?
I get that error on z2m since months : error : z2m: No converter available for 'action'
no way to identify where it comes from ! which device causes this action.
### What did …