-
Request for adding a profile for [LEDVANCE SMART+ Wifi Floor Corner RGB + TW](https://www.ledvance.com/consumer/products/smart-home/smart-luminaires/smart-indoor-luminaires/smart-floor-standing-lumina…
-
Greetings,
After reading the following line "_The script will automatically connect to your light (assuming it creates a "SmartLife-*" SSID. If not, let us know.)..._", I thought it'd be a good ide…
-
I try to flash a LSC with a Raspberry Pi (both a Pi3 and a Pi4), but it results in this error, any idea how to fix this ?
LSC smart plug 2578685 device version 1.1.8
```
./tuya-cloudcutter.sh -s …
-
I have a Tuya-powered smart ceiling fan: https://www.amazon.com/dp/B0BWJQGQ7K
It is running firmware v2.1.17, so known not vulnerable, however the serial pins are easily access so it's easy to take…
-
### The problem
the tuya statuses no longer match. When the lamp is on, the status remains off, the same for the doors, etc.
### What version of Home Assistant Core has the issue?
2023.12.3
### Wh…
-
# Log Message
```
2024-05-05 13:16:54.742 WARNING (MainThread) [custom_components.tuya_local.config_flow] Device matches None with quality of 0%. DPS: {"updated_at": 1714907795.6015062, "201": "{\…
-
Hey,
can I patch WIFI Switch Module (model: QS-WIFI-SO5) by Tuya-CloudCutter?
My Wifi switch module has insite ESP module (not Beken module).
Specs:
https://templates.blakadder.com/QS-WIFI-S…
-
I'm not sure if I am requesting this correctly but, I have the MI-EW011-999WW and i would like to use cloud cutter as I am trying to go fully localized for my light control. I don't know how to build …
-
Something for you guys to play with. I dumped the oem firmware before flashing esphome and *attempting* to reproduce the uarts comms from scratch.
Was requested to share the dump here.
[lenovo_p…
-
Hi,
I bought two LSC devices to play with:
LSC 3202086 XXL Led strip (CCT + RGB/C)
LSC 3202087 Power plug with energy monitoring
## 3202086 Ledstrip
The ledstrip has a bare BK7231N chip. In the…