-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
[x ] I have read the Troubleshooting section of the ReadMe
## What type of issues is this?
[ ] Request to support a new module
[ ] Bug or problem compiling the library
[x] Bug or issue w…
-
I would like to know hot to enable NavTIMEUTC topic from a f9p ublox GPS
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
```
Using GPS emulator to output uBlox NAV-POSLLH format data, the header should be
"0xb5,0x62" ,but the output data is "0x3F,0x62".
also the checksum is almost error, I found that the checksum numb…
-
I am trying to run `ublox_gps_node` with the provided `zed_f9p.yaml` config file; however, it produces error `[ERROR] U-blox: received NACK: 0x06 / 0x01`. Suggested by different webpages, the problem…
-
# Design Goals
* Use the same terrain data across all devices in the ecosystem
* Autopilot (PX4, ArduPilot, Etc)
* Companion Computer (grid_map_geo) or other computers running ROS 2
* Grou…
-
Hello,
when i try to compile, i get the following error:
c:\HSA\Code\ublox-dashing-devel>colcon build
Starting >>> ublox_serialization
Finished > ublox_msgs
[Processing: ublox_msgs]
Finished…