-
Example: https://mila.quebec/en/publications/
It would be nice to reuse the same code as in the Mila website. Not sure if that's 'easily' possible via RTD
-
I tried `sudo port install gnuradio`, but I get the following error:
```
---> Fetching archive for python37
---> Attempting to fetch python37-3.7.10_1.darwin_20.arm64.tbz2 from http://fco.it.pack…
-
Hallo folks,
I sniffed my own 433MHz
- remote and
- weather station
via universal radio hacker and a RTL-SDR-Dongle.
For the remote I wrote my own Python script for sending on/off signals …
-
### Steps to reproduce
1. Download gnuradio through the Radioconda installer
2. Create the following in GNU radio companion
### Expected behavior
The .wav file should be broadcasted to the des…
-
I am trying to correctly communicate between the two SX1278 in FSK mode, but it fails.
The first frame is received correctly. All the bytes go there, but not the next time.
On subsequent frames, the…
-
I tried installing the GUI universal radio hacker, had no problem on Kali. But, after installing parrot OS & trying to install URH (there is another radio-hacker installed, but it goes directly to the…
-
I've been attempting to get this software to work for a couple of weeks now and I can't seem to pick up any messages sent over an AIS receiver. Just wondering if any helpful tips or tricks I should lo…
-
### Steps to reproduce
1. Plug HackRF in
2. Launch `hackrf_info`
### Expected behaviour
```
Found HackRF
Index 0
Serial number: -----------------
Board ID Number: 2 (HackRF One)
Firmware Vers…
-
/*!
* Bootstrap RTL v3.3.6(https://github.com/mojtabakaviani/bootstrap-rtl)
* Copyright 2011-2015 Kaviansoft, Ltd.
* Licensed under MIT
*/
/*! normalize.css v3.0.3 | MIT License | github.…
-
RadioLib supports AX.25 as of update 3.3.0, it should be possible to add support for APRS as well.