-
Issue :
I'm currently using Sanoma version 14.0 in conjunction with BlackHole, AU Lab, and a USB-C DAC/Amp. After each switch, the volume is automatically set to the maximum level without user inpu…
-
Hi, thanks for sharing this nice project!
I tried to use the "Adafruit Speaker Bonnet for Raspberry Pi" for the sound.
I tested the sound card by following the guide from Adafriut (https://learn.ada…
-
because the usb is streaming nd being powered at the same time it creates a buzz in the DAC when audio is streamed to pc over 2.5mm jack to the blue port. If could release a version that turns off usb…
-
Hi
I'm using different audio devices(for example, HD Audio at home and a usb DAC at work), I 'm wondering is it possible to change the audio source manually/automatically when changing the default si…
-
When trying to increase decrease mute the volume I've got :
```
INFO:root:Incrementing global volume
Failed to get sink information: No such entity
INFO:root:Incrementing global volume
Failed …
-
When using the teensy as a USB audio device I get distorted audio from both the DAC and using the audio shield after around 2 minutes of playing a song. Once the distortion starts it gets progressivel…
-
I have this USB DAC...
http://www.hirestech.com/product/?pid=107
A common problem with USB DACs is pops/clicks in the audio, and it's easily solvable by changing the buffer size. A lot of people run…
ghost updated
8 years ago
-
I've set up a fresh Pi5 with Raspberry Pi OS just for this project today. The Pi is connected via HDMI to a TV which outputs audio fine when asked.
I'm still running with the TV connected, and can…
-
### Describe the bug
When playing audio files with sample rate of 176.4 or 352.8 kHz, in addition to the music, we can hear a constant sizzling stronger at 352.8 than 176.4. At all other sample rate…
-
I thought about the Raspberry Pi Audio output quality.
For my speaker i am going to derive a bit from your configuration.
There are two different possible ways for me to realize a better Sound outpu…