-
Running a Wipi on a Naomi2 with a logitech G29 wheel and getting the error "Warning, no haptic device found!" by running "openffb -a". Why?
dmesg shows the wheel:
```
[ 8.535706] logitech 0…
-
Hi,
Openwrt-23.05 branch (git-24.212.79335-cdbe903)
Linksys WRT3200ACM
I have a ZTE modem/router USB 3.0 network 4G/5G connected by USB to a computer it negotiates at high Gbps speed.
I have a que…
-
I am using the Raspberry Pi Pico board's native USB Host hardware to implement a USB MIDI Host driver for TinyUSB in the [usb_midi_host](https://github.com/rppicomidi/usb_midi_host) project. The drive…
-
## Environment
- **OS:** Android
- **Scrcpy version:** 2.6.1
- **Installation method:** Windows release
- **Device model:** Moto E20
- **Android version:** 11
## Describe the bug
H…
-
Hi everyone,
I don't know where i can answer my question because there is no discussion section.
I looking to establish wifi comunication between two esp32's, one connected to a PC and another one t…
-
**Describe the bug you encountered:**
I tested the usb_device example with version 0.6.0. The PIO USB device does not enumerate. I have not attached a USB sniffer to the figure out what is going …
-
Any thoughts why we can't use `find_device` here?
https://github.com/rear/rear/blob/2073e77f1ed213653bbf846d67bef346a9f65da9/usr/share/rear/format/USB/default/200_check_usb_layout.sh#L1…
-
I am seeing the below on the gui...
Device status
ERROR: smartctl requires a device name as the final command-line argument.
Whats happening is now my hard drive ins…
-
### Description:
My device sends data out over CDC ACM. When the host PC reboots the device is not (power) reset so it stays in this state. The host is not able to reinit the device so it's missing…
-
**Describe the bug**
While developing downstream firmware, I have encountered an issue with the NXP MCUX IP3511 USB device driver (`drivers/usb/udc/udc_mcux_ip3511.c`) attempting to lock a mutex in I…