-
I'm facing an issue with a USB numpad keyboard that has extra media buttons.
The keyboard appears as one device as expected
mazvydas@octopi:~$ ls /dev/input/by-path/
platform-3f9800…
Mazvy updated
2 years ago
-
It would be really nice if the rp2040 could reload the bitstream whenever it notices a the bitstream switch change.
-
在复合设备例程中,如果使用STM32F407的FS USB内核会造成U盘枚举失败。原因是STM32F407没有4号端点。
解决办法,去掉不需要的接口,在 STM32F407的FS core上不使用端点4.
In the composite device demo, the MSC class use enpoint 4 for data transfer. If we USB FS cor…
-
I have an Artisul D13 which is an UC-Logic tablet and I'm searching for tablet drivers for it. No driver known to me works. I can use the tablet as a monitor (out of the box) but its pen doesn't get r…
-
Is it possible to get to the service shell on the Sony Alpha 7R V (ILCE-7RM5)? When I attempt this, I am able to put the camera in mass storage device mode and replace the USB driver using Zadig, but …
-
### Operating System
Linux
### Board
Raspberry Pi Pico
### Firmware
/examples/host/cdc_msc_hid
### What happened ?
When connecting a USB keyboard (or mouse) to the Pico via a USB hub, the proce…
-
The code below attempts to connect to a non-existent hislip instrument "hislip999" on the local machine. The call to 'open_resource' hangs.
To Reproduce
--------------
```python
import pyvisa
…
-
```
Model: ILCE-QX1
Product code: 0002438256
Serial number: 03073257
Firmware version: 1.00
Lens: Model 0x13a08023 (Firmware 1.05)
Using drivers Windows…
-
Using the evaluation board(MIMXRT1064-EVK), I am considering a project that incorporates MSC.
I added support for SD card insertion and removal to the sample project(evkmimxrt1064_dev_msc_disk_freert…
-
QSPI transfer error flag (TEF) is set while reading a certain block in `qspi_read_cmd_qaddr_qdata` this happens exactly when the host (in this case arch/Linux) mounts the storage. I tested a lot of th…