-
**Device Information | **
- SOC: RK3528
- Model H96MAX M2
**Armbian Version |
- Kernel Version: tried Linux 6.6.36
- Release: Armbian Bookworm
**Describe the bug:
I wanted to add a ne…
-
### Describe the bug
I'm trying to run:
`sudo rpiboot`
on my MacOS M1, end I got an error `Cannot open file fixup.dat`
The blue LED goes off at some point. I'm connected while having a USB hub.
…
0xF16 updated
8 months ago
-
Hi
Cannot seem to flash CM4 EEMC in Slot 1 as the rear MINI USB does not connect to the PC Slots 2 + seem to work ok?
Any thoughts?
-
### Describe the bug
Not sure if this is relevant but with latest distros in WSL, you also need to install `gcc` and `make` packages (and their automatic dependencies) otherwise the compiling fails -…
-
- 1.7.9
- Ubuntu 20.04, Win10
- No Dev Tools output
I have tested 7 new CM4s with HW revision ```c03141``` and new bootloaders. The progress bar appears for the cm, but the cm is never mounted as…
-
I'm attempting to usbboot a raspberry pi zero from a raspberry pi 4.
This works perfectly when usbboot is run from command line.
However, when adding the following rule to udev rules:
> SUBSYSTEM…
-
Hi, any chance of some instructions on how to run ipctool from an sdcard, serial connection or from micro USB? Im having trouble setting up a tftp connection.
-
As of now , I was manually making boot.img, signing it using usbboot tool for my custom yocto based image.
I would like to incorporate above step in yocto toolchain. so that I will get final signe…
-
Hi guys!
I'm using a non-SD card setup of 6 x RPi zero that booting with rpiboot and fetching the filesystem from NFS folder.
The issue here is that booting them serially with rpiboot takes a lot o…
-
### Describe the bug
I've built `rpiboot` on my Fedora and was able to use it to boot and enable my Compute Module 4 as USB mass storage (`/dev/sda`). However, during the execution, the `rpiboot` r…