-
As discussed in https://github.com/victronenergy/gui-v2/issues/669.
"It would be great if the gui can count how often certain controls are used, and shows the card with the most used controls first…
-
Goodmorning,
is there a status file which indicates if the blanking is active or not? The waveshare 7 needs to be switched of by an io which i can do with node red.
Thanks,
Patrick
-
This project can't be built because the software/ext/velib library is not in github.
-
Hello Fabian,
I have used your project to successfully integrate my new Sun Inverter, see: https://www.victronenergy.com/upload/documents/Datasheet-Sun-Inverter-EN.pdf.
I am not able to read all…
-
I am using Homewizard energy meters which provide a nice restful API and JSON energydata.
https://www.homewizard.com/de-at/
https://api-documentation.homewizard.com/docs/getting-started
The 1Ph…
-
Hi,
thanks for the great project, works great on two smart solar chargers. I have added a third solar charger (100/20 @ 48V) and want use not required power before fed into the grid for an external 6…
-
Jeremy Albrecht via [community](https://community.victronenergy.com/answers/287728/view.html):
I have a Cerbo running 3.40~16, and an Orion XS connected to it. Everything seems to work as expected,…
-
Relays confirm to work with RaspBerry, but Digital Input won't. It will require additional work for making Digital Inputs working with RaspBerry.
This was tested with Venus 3.40-2 and RemoteGPIO 3.2.…
-
Auto start setting differs from the control cards equivalent in two aspects
- Doesn't show dialog when toggled off
- Isn't disabled when the generator is running
Also use "Manual Start" for but…
-
Seit 13. Juli 2023 05:50 Berliner Zeit war der Cerbo nicht mehr erreichbar, weder über LAN, WLAN, noch Bluetooth:
Seltsamerweise schien aber die Datenübermittlung an das Victron-Portal durchgängig…