-
hi, again me, I d like to add the ssd 1306 display I just received to my controller but can t find how to adapt the exemple code to my teensy 4.0, no problem to wire and and vcc but how to wire the sc…
-
I miss the horizontal VU meter in the new 4.0. Perhaps making it an option. Also, the Op Guide must still be in development but.. there is no reference to the segment titled "User Logo". The message p…
-
Problem:
Some users don't check their microphone level before recording voice samples. This results in a lot of non-usable voice samples and a waste of effort.
Solution:
Tell users to check their mic…
-
The electrical circuit needs some voltages to work:
- +15V and -15V for op-amps (~70 mA @ -15V, ~100 mA @+15V) and LEDs (~500 mA)
- measured on +15V: 290 mA with 2 channels (with vu meter on 15V) …
-
To reproduce:
Load Macro 2 Oscillator with VU meter (like AS MonoVUmeter). connect Aux output of Macro 2 to input of the Vumeter. You will see no signal. Then move the Harmonics control and you will …
-
```
What steps will reproduce the problem?
1. Installed Soundflower per instructions
2. Start an audio (iTunes song or streaming audio from internet)
3. Check the vu meter in System Preferences>Sound …
-
```
What steps will reproduce the problem?
1. Installed Soundflower per instructions
2. Start an audio (iTunes song or streaming audio from internet)
3. Check the vu meter in System Preferences>Sound …
-
```
What steps will reproduce the problem?
1. Installed Soundflower per instructions
2. Start an audio (iTunes song or streaming audio from internet)
3. Check the vu meter in System Preferences>Sound …
-
```
What steps will reproduce the problem?
1. Installed Soundflower per instructions
2. Start an audio (iTunes song or streaming audio from internet)
3. Check the vu meter in System Preferences>Sound …
-
```
What steps will reproduce the problem?
1. Installed Soundflower per instructions
2. Start an audio (iTunes song or streaming audio from internet)
3. Check the vu meter in System Preferences>Sound …