-
### The problem
General issue report
I'm getting an error when trying to upload firmware using the ESPHome OTA process. Here are the error logs:
Starting update from 192.168.168.182...
[16:23:31][…
-
-
Hi all
I have a 3018 engraver with a woodpecker 3.2 board. Everything works fine but I am considering trying to make the unit WiFi as my work space and cutting area are in 2 different rooms.
Is the …
-
### Feedback
It would be **really** helpful to have at lease short documentation how to integrate I2C device with Home Asssistant.
### URL
https://www.home-assistant.io/common-tasks/os/#enable-i2c
…
-
**Important notices**
Before you add a new report, we ask you kindly to acknowledge the following:
- [X] I have read the contributing guide lines at https://github.com/opnsense/core/blob/master/…
-
Had previously a Wemos D1 mini pro with 16mb flash and everything was working fine (using the spiffs) but as i use that board for other projects i ordered a Wemos D1 mini v3 and a SD card shield for i…
-
### Duet Forum Discussion Thread
https://forum.duet3d.com/topic/36729/deadlock-reading-the-object-model-from-a-plugin/10
### Which Duet products are you using?
- [ ] Duet2-Wifi
- [ ] Duet2-Ethernet…
-
I have four Bluetooth Proxies all ESP32 based. Two of them do 'other stuff' and work fine whilst two of them are purely BT proxies and configured identically. Only one of those behaves as expected in …
-
### Describe the problem
After using the IDE for some time, the IDE decides that even though _itself_ identified the board/port, the board/port in question does not exist according to the uploader. I…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…