-
### Answers checklist.
- [x] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### What happened?
WLED gives very poor performance on artnet ethernet WT32-ETH01 board.
WLED support 20 universe each universe has 170 RGB pixel data for Ethernet firmware.
I set 8 LED data ea…
-
Hi,
Thank you for this add-on, very useful.
I am not very confortable with HA so excuse me if this request is not relevant here.
As the title says, my ECU was replaced because not connecting an…
-
**Describe the bug**
Built the project (everything soldered to the pump unit now), however i couldn't get a stable WiFi connection. Sometimes the Webinterface can be accessed, but most times is wasn'…
nr001 updated
1 month ago
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi, thanks for this project! It's great that I can re-use my many ESPHome devices for location tracking :smiley:
This issue is just some documentation-related suggestions.
### WIKI update
Th…
-
**Describe the bug**
ESP_AT WiFi driver causing secure fault on WiFi disconnects.
**To Reproduce**
Steps to reproduce the behavior:
1. Add ESP_AT WiFi driver with TFM enabled
2. Connec…
-
### The problem
### Problem Description
When I use the following configuration in my ESPHome YAML:
YAML
wifi:
enable_on_boot: False
And then manually connect to the network in STA mode…
-
On redhat/el7 there a numerous parameters associated with configuring wifi. E.g.:
```
ESSID=foo
MODE=Managed
KEY_MGMT=WPA-PSK
SECURITYMODE=open
MAC_ADDRESS_RANDOMIZATION=default
TYPE=Wireless
…
-
My S3 can enable wifi just fine with the default heap, but C6 immediately runs out of memory:
C6:
```
[INFO] - Initializing Wifi driver
[INFO] - esp-wifi configuration Config { rx_queue_size: …