-
failed to build the wifi_router example
```
Executing action: all (aliases: build)
Running ninja in directory /Users/dilsh/Documents/fyp/esp-iot-bridge/examples/wifi_router/build
Executing "ninja …
-
I have a USB RS485 adapter connected to a Pi4 and I have Infinitude running in Docker.
https://www.amazon.com/gp/product/B00NKAJGZM
I'm on a higher firmware than is supported for the Proxy config, b…
-
Currently, only LoRa is supported for tracker communications. It is a good choice to avoid problems in possibly jammed or similarly deteriorated WiFi environments, however it requires a whole set of a…
-
I've tried the 2nd and 3rd gen Echo Dots to no avail.
WiFi connected
IP address:
192.168.1.20
Constructing device 1
Adding device 1
Espalexa Begin...
MAXDEVICES 10
Done
Connecting to MQTT.…
-
it dosnt pickup the emulator the problem is the broadcast is not like a real hue this is a sample of how it should be
These are broadcasts, groups of 6 (3 doubles of different UPnP devices), with …
-
I'm trying to get ArmadilloHTTP to work with HTTPS requests on my esp32, I tried your pio environment, but I'm getting a linker error on build, I've attempted the following example:
#include "Ardui…
-
Good day. I received the T-Halow units today, but I have a few questions after looking over your site.
When I plug in via USBC on a Linux PC I can see the ttyACM0 and go there to see stats about t…
-
**Describe the problem you have/What new integration you would like**
Request native support for Matter (formerly **_Project CHIP_** / **_Connected Home over IP_**) Application Layer in the E…
-
No details are available for how to utilise MQTT while running ESP MESH LITE.
The user guide mentions that MQTT can be used.
Would be an excellent improvement if an example was created that showed M…
-
I'm using a board with an ESP32-WROOM-32U, 16MB module.
I have replaced my ITC-5 with an Arduino DUE and the library of Timo ( thank you so much). Now I want to implement a WiFi bridge with the esp32…