-
If the Pyboard is woken from standby by the tamper pin X18, the RTC is reset to 1st January 2014 regardless of any setting performed in code.
It appears impossible to prevent this from Python as it o…
-
I have posted issues regarding the only directive and always get the reply that what is to me an issue 'it is a specification`.
I do understand that `only` is a bit peculiar, but still it's behavior …
-
* OEM LoPy
* Pycom MicroPython 1.19.0.b3 [v1.9.4-44b21d6] on 2018-07-01; LoPy with ESP32
```
(sysname='LoPy', nodename='LoPy', release='1.19.0.b3', version='v1.9.4-44b21d6 on 2018-07-01', machine='…
-
```
(sysname='WiPy', nodename='WiPy', release='1.20.0.rc10', version='v1.9.4-350eac8 on 2019-04-16', machine='WiPy with ESP32')
```
sometimes, for a reason unknown to me this call crashes and dumps…
-
I am connecting my device to a HM-10 BLE product using GATTC.
In super summary, BLE works the following way for GATT,
There is a service, which MAY contain characteristics.
The characteristics wi…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
I'm using the ESP32 board.
* The firmware version you are using. Yo…
-
WiPy 2.0, 1.20.2.rc3-0.8.0-vanilla-squirrel
I have a machine that runs a main loop.
The loop usually takes less than 50ms and I sleep the difference to make it 50ms
Every 29 seconds the loop take…
-
The microcontrollers support counting rising/falling edges at rather fast pace (1-10kHz), eg to measure RPM of a motor with hall sensor or disc encoder. It would be nice to have the interrupt handling…
-
**Using:** sysname='LoPy4', nodename='LoPy4', release='1.17.3.b1', version='v1.8.6-849-83e2f7f on 2018-03-19', machine='LoPy4 with ESP32', lorawan='1.0.2', sigfox='1.0.1'
Have an application with t…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* The firmware version you are using. You can get it by executing the …