-
I can connect, read all the values but I cannot change any of them, i've heard it is also the case for Captur 2, both using Easy link systems. Is there a work in progress? Anything I can try? Thanks!
-
### The problem
onvif fails to setup the cameras.
I have 3 cameras, all fail to setup with the same error.
I have no issues with 2023.4.6.
### What version of Home Assistant Core has the issue?
…
-
Hi,
I'm trying to get the YI 4K into wifi station modewith SW version 1.10.9 by adding a config to the SD-card, but all attempts that i tried failed...
First try:
```
##### Wifi configuration fi…
-
Hello RoleoRoleo, i have a question for you.
Recently i bought a camera from Taobao, but i couldn't connect it to my phone via app.
I tried Chinese version of app also..."This camera can only be use…
-
mmm i have simply inverted human_stop with human_start
here:
http://xxxxx:8080/index.html?page=mqtt
works perfetct!!!! :D
the cam send mqtt human_start on detection and after 40 seconds sen…
-
Hi,
I'm using a Yi Dome Camera X with the latest firmware (yi-hack-MStar 0.4.8). I was previouly on yi-hack-MStar 0.4.4 and everything was OK.
When I use the command http://ip:8080/cgi-bin/prese…
-
The Yi Dome Guard KFUS r30gb (9.0.05.32_202004101552) on 0.1.9 works way better than the h60ga I've tried before.
There's one pretty massive issue, though: After toggling privacy mode (on then off)…
-
### Is there an existing feature request for this?
- [X] I have searched the existing requests
### Description
Yi 4k+ has built-in 3 axis gyroscope and 3 axis accelerometer, cross-border compensati…
-
When playing audio through the camera speaker, I am getting feedback because the microphone is on and is picking up the audio from the speaker. I noticed there is a feature in the `YI app` to turn th…
-
Hi,
I have a Tapo C100 camera.
You can get an uboot shell via grounding the CS pin of the spi flash, when it shows "autobooting" message.
After that, you can boot in to linux via init=/bin/sh boota…