-
At first I had trouble getting access to the unused GPIO pins with the Adafruit RGBMatrix "bonnet":
sudo python gpiotest.py
Traceback (most recent call last):
File "gpio.py", line …
-
### Problem
Duckiebot does not boot.
No HDMI output.
Steady red light.
### Events
I was testing various Docker containers.
The Hat was on but never used to drive motors.
…
-
Hi,
The code works great on most LED matrices I have, but I recently got this one so I could do an outdoor installation:
http://www.ledcontrolcard.com/outdoor-led-module-c-49/latest-outdoor-p5mm…
-
Wiring PI and RPi.GPIO are supported on this board; unfortunately this package mistakenly detects the board as a BeagleBone black.
-
I am using Capacitive Touch Sensor Hat.
I ran playtest.py on my Raspberry Pi. When I touched the board directly, it worked OK. But once I connect the alligator clips to the board, it didn't work prop…
-
Hello There,
I have some troubles getting my HUB-75E Matrix to work with the Adafruit Hat Bonnet. I did shorten the circuit of the E-Line on the Bonnet as they described on their website. I provide…
-
Is there any way with this code, or another that you know of, to display animated GIFs on the LED matrix?
-
Hello,
I have two Feathers nRF52. One is a peripheral programmed with the examples/blemidi and it works fine when I connect from Linux or iPad.
I am trying now use the second one as a Central de…
-
hat-trick!
https://github.com/adafruit/Adafruit_BMP3XX
-
I am unable to run infopanel, even using the test_config.yaml file provided. Below is the error:
root@raspberrypi:~/infopanel/infopanel/tests# python -m infopanel --config ./test_config.yaml
I…