-
### Bug report
**What is the problem?**
Occasionally (>10% of all devices), hang after an autoupdate and need a manual powercycle to reboot.
I managed to reproduce this while a serial cable w…
-
Hi Johang,
since to weeks i try to setup the last build.
Yesterday i build an local immage:
wget https://dl.sd-card-images.johang.se/boots/2024-06-01/boot-a20_olinuxino_micro.bin.gz
wget https://d…
-
### Describe the bug
STA+AP with automatic channel does not work, even with having the channel width configured at 20 MHz. If I enter the channel manually, it works as expected.
### OpenWrt vers…
-
Hi,
I'm new to STM32 and I need some of it features to work, most of them seems to work very well, but i can't get VCP to work reliably. I'm using nucleo32 L432KC board.
I've got problem with no…
-
My MCU in deep sleep and flashing only with `monitor connect_rst enable`
On fresh firmware [567b670](https://github.com/blackmagic-debug/blackmagic/commit/567b670ce67cefdf624638d35430c6599ba75c7e) no…
Azq2 updated
10 months ago
-
Hello, i have X96Q TV box with H313, 2GB RAM and 16GB ROM. I'am not able to boot any of yours H313/H616 images. Image that should work - MiniArch-20231112-6.6.8-board-h313.x96_q-SD-Image.img.xz - ends…
-
While working on a project with the esp32c6, the wifi features, and embassy, I'm hitting an issue while using probe-rs to debug.
On first power up, the `esp_wifi::initialize` works as I would expec…
-
I'm seeing an exception raised when I try to randomize an object. I have a class that models an AHB transaction and I'm trying to randomize the number of cycles I stall before driving it on the bus. …
-
Not exactly sure when this broke, but I used to rely on it in v1.5 something:
```using Gnuplot
@gp :fig1 rand(10) "w l" # works fine
s = :fig1
@gp s rand(10) "w l" …
-
Hello
I have an non working HDMI module from an early Inspire1 Remote
Which was long not used and so NAND run full of bad blocks. Was my First thought.
Board is labeled "WM610_GRCP_MFI368_V1"
…