-
I've got an esp32 pico D4 that I'm trying to use to control a few basic rgb leds on a custom pcb. I've been working through the tutorials in arduino ide and everythings been going fine (I'm able to c…
-
### Operating System
Windows 10
### Esptool Version
4.4
### Python Version
3.10.8
### Chip Description
ESP32
### Device Description
TinyPico v3
### Hardware Configuration
No
### How is Esp…
-
I'm trying to get the awesome debugging support introduced with #36 working but am struggling with even getting upload to work on Windows.
* I have two Picos wired as shown in the [Getting Started …
-
The current code hard codes the LED pin.
Would it be possible to add a build for the Pico-W, as the LED uses an IO pin on the Wifi chip.
Would not want/expect Wifi support, but would be useful to ha…
-
hello, I love your Led_effect configuration, I test a lot of different things, I have a stealthburner on a switchwire, with a pcb of 8 leds for the logo, 2 leds for the nozzle, and a bar of 10 leds fo…
-
I assembled the circuit following the instructions and measured the characteristics of the filter with audio spectrum analyzer.
As a result, I found that the measured filter characteristics differed …
-
Hello there!
Provided library in /example/factory/pico/firmware has got lot's of errors:
- wrong function location - Use of undeclared identifier errors
- setTX, setRX - No member named 'setRX' i…
-
This is a question, not an issue.
Is there a way to detect the difference between a Pico (i.e. a generic RP2040 board) and a Pico W, either when the board is in BOOTSEL mode or at startup time? Alt…
-
In GitLab by @ChrisKnaden on Aug 17, 2023, 18:57
_Merges CK-Dev -> main_
- /epd5in83b_V2.cpp
- /epd5in83b_V2.h
- /epd5in83b_V2.ino
- /epdif.cpp
- /epdif.h
- /imagedata.cpp
- /imagedata.h
- /Raspberr…
-
Thank you for making the project available, however, it would not detect the SWD pins on a Raspberry Pico for some reason. I used pins 2 - 7 on an Arduino Leonardo with pin mask 0xFC and connected any…