-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
When using Ino on a Raspberry Pi (Raspbian/Debian 'Wheezy') Most simple sketches compile correctly, but the pulseIn function appears to be compiled badly - the result is incorrect readings when the sk…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
error message
Arduino: 1.8.5 (Windows 8.1), Board: "NodeMCU 0.9 (ESP-12 Module), 80 MHz, Flash, Disabled, All SSL ciphers (most compatible), 4M (no SPIFFS), v2 Lower Memory, Disabled, None, Only Sket…
-
```
What steps will reproduce the problem?
1. Open sketch and select 'use external editor' - workspace is then locked and
on build, it will update the files in that sketch as normal.
2. Open a second…
-
```
What steps will reproduce the problem?
1. Open sketch and select 'use external editor' - workspace is then locked and
on build, it will update the files in that sketch as normal.
2. Open a second…
-
I'm trying to use this library with my Arduino uno wifi. But, I'm getting the following error when I upload the code to my Arduino.
`/var/folders/s8/zkksy1sn69g1972rdbc0r8d80000gn/T/arduino_build_…
-
Following documentation here to install lib dependencies in Arduino IDE (https://github.com/HelTecAutomation/HeltecDocs/blob/master/en/source/esp32/lorawan/config_parameter.md) but I never get the opt…