-
I have been able to consistently reproduce a problem using an arduino zero, MPU6050 and XBee. MPU6050 is connected via I2C and XBee on pins 0 &1.
Using the following sketch I am able to get the I2C …
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
```
What steps will reproduce the problem?
1. XBee modules in API mode 2, with XBee.h included in arduino file
2. Implement SoftwareSerial example using XBee.h as well
3. Upload to ATtiny chip using A…
-
I got 2x 2.1.1 hoverboards. I have unlocked the boards but getting errors when i try to write to them. Tried both STM Util and STM Cube prog with same failures leading me to believe it's not a softwar…
-
First, thank you in advance. I put my CNC together just today. And everything went smoothly until I came to set the XY axis using the tool in the corner. It was a grey colour and wasn't working. It is…
-
```
I am trying to connect my Raspberry Pi via SPI to the Arduino UNO with the RPi
as Master.
I have linked pin10 (SS) to pin2 (so there are no other pin changes on that
port) and attached an inter…
-
```
I am trying to connect my Raspberry Pi via SPI to the Arduino UNO with the RPi
as Master.
I have linked pin10 (SS) to pin2 (so there are no other pin changes on that
port) and attached an inter…
-
```
I am trying to connect my Raspberry Pi via SPI to the Arduino UNO with the RPi
as Master.
I have linked pin10 (SS) to pin2 (so there are no other pin changes on that
port) and attached an inter…
-
```
I am trying to connect my Raspberry Pi via SPI to the Arduino UNO with the RPi
as Master.
I have linked pin10 (SS) to pin2 (so there are no other pin changes on that
port) and attached an inter…