-
It seems like Pymcuprog can read a byte from (an undocumented?) memory section that can be used to determine which silicon revision the chip is. If you're struggling with a weird bug in the MCU progra…
-
When i try to build 2.1.2.1 on VScode, i get the error:
Marlin\src\module\temperature.cpp:330:38: error: static assertion failed: PREHEAT_2_TEMP_HOTEND (250) must be less than HEATER_0_MAXTEMP (250)…
-
### Describe the Bug
I am on gentoo with the musl overlay. I am have successfully compiled firmware for the ferris sweep keyboard. However, even though lsusb says
```
Bus 001 Device 018: ID 03eb:…
-
### Describe the problem
When compiling the compiler display the error: `Connection got Disposed`
### To reproduce
Compile the program below and it will stop here:
```text
Using library F…
-
Trying to use a standalone ATTiny85 with the Adafruit MMA8451 accelerometer, example code compiles just fine on version 1.5.2, but not 2.0.0
-
I followed all instructions as in https://github.com/webusb/arduino, to work WebUSB with my 'Seeeduino XIAO' board,
Modified landing address to, WebUSB WebUSBSerial(1, "localhost:8888");
I can uploa…
-
Fuses and lock bits with unused bits can show spurious write errors when writing 0 in the unused bits. Happens both with `-U` and the terminal, for example, try writing 7 to the efuse of an ATmega2560…
-
dg1afg
Tue 13 Sep 2016 05:46:32 PM UTC
I have problems programming old AT90S8515 with avrdude 6.3. It's impossible to program the controller. The output dialog as below.
Reading the controller a…
-
Apparently, @mariusgreuel's Avrdude fork for windows supports COM port discovery via USB VID/PID. This is actually very neat if you're using a UART-based programmer that has a tendency to bump the COM…
-
Hello Timo,
I tried to get the library up and running on my Arduino Uno, in debug mode. (I don't have a CAN board connected (yet)).
It behaved strange and hung after just 13 message frames. I made …