-
Currently i use Attiny85 with micronucleus and in arduino IDE i have to add "digispark" board repository:
`http://digistump.com/package_digistump_index.json`. But they only support ATTiny85 and ATTin…
-
I'd like to split the Studio 7 specific stuff out from Issue #6331.
I'll copy what I think is relevant into this issue.
-
This seems to be related to #29, but happens on linux, even after replacing all symlinks
Steps the reproduce:
```sh
sudo docker run -it debian:buster-slim
cd
apt update && apt install -y curl…
-
## Describe the bug
I bought 4 [Tuya Zigbee smart plugs](https://www.aliexpress.com/item/1005002344798281.html?spm=a2g0s.9042311.0.0.30fe4c4dnraeY4) and easily connected to Phoscon (running wit…
-
in the Spencekonde AtmegaTiny core it is possible to program the Attiny0,1 and 2 Series with PYupdi just using a serial adapter and a single resistor. This words fine, even for the DX cores. It should…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
I'm new to Marlin, and relatively new to 3d printing. This is my first printer, Ender-3 with 4.2.2 M…
-
### Board
Unexpected Maker FeatherS3 (but likely any board with a 16MB flash)
### Device Description
Unexpected Maker FeatherS3
### Hardware Configuration
Nothing connected
### Version
v2.0.5
…
-
I have an atmega2560 with a ramps 1.6 board running octopi very well. I am trying to add a BLTouch but have been totally unable to search out the correct "AR" pin numbers for the sensor and control pi…
-
Brian Stott
Tue 13 Sep 2011 10:53:40 AM UTC
When used with Atmel Manfacturer's Chip - this case Atmega328P the avrdude application is hard coded to compare reported chip ID with inaccurate ID(s).
E…
-
Looks like logical mistake in Python code when SPI initialization required.
```
Sent 65 68184.429559 68184.429279 7: seq: 10(80), allocate_oids count=2
Sent 66 68184.430139 68184.429819 8: seq: 1…