-
Hi,
first of all: thanks for your awesome work here. Without your work there would not be such a great and cheap reflow oven available :-)!
I have currently followed your instructions and set up my T-…
-
Hi, just to flag this. I have a project which uses an AVR4809 and I program it using pyUPDI. My 13k program takes 34 seconds to upload. For preference I would like to use pymcuprog, but the same code …
-
Hello, You make a good job !
Is it possible to get milliseconds from DS3231 ?
thanks
-
Hi,
In the documentation here : https://github.com/SonarOpenCommunity/sonar-cxx/wiki/sonar.cxx.cppcheck.reportPaths
The cppcheck version is 2.70 but this is not a valid version.
Actually the las…
-
Hi
I have replaced my 644a chip with a 1284p
https://github.com/MarlinFirmware/Marlin/tree/Release/ArduinoAddons/Arduino_1.0.x/hardware/OMC_tkj
is my old hardware files...
of course they are no go…
-
I don't know if this is the right place to ask this question, but is it possible to invert the spindle PWM (preferable without changing the firmware) ?
I managed to rebuild a Mach3 board to Grbl, b…
-
Have a Z8T that I upgraded to use zm3e4 (v 1.0) board, the Zonestar wifi module (from Zonestar _official store on AliExpress,) 2208 steppers for all motors, and LCDDWIN (from same store) and using fir…
-
stsp
2006-10-30 18:32:12
Hi.
It looks like some (many?) AVR microcontrollers are
preconfigured to use an internal RC oscillator. Since
this oscillator is about 1MHz, the avarice can't work
rel…
-
Mon 02 May 2011 08:25:50 PM UTC
The AT89S52/AT89S51 are Intel MSP-51 (8051) compatible microcontrollers manufactured by Atmel that can be programmed in-system using an SPI interface very similar to t…
-
Joe
Mon 30 Sep 2019 05:45:23 PM UTC
Programmer hardware: usbasp
Device type: ATtiny9
Hi,
avrdude returns -1073741819 in Windows 10 for ATtiny9.
It uploads the file correctly just that exit value is…