-
### Bug Description
I can successfully issue a G29 P1 commands and I get a 5x5 point matrix probed. G29 T0 reports a mesh like this one:
> Send: G29 T0
> Recv:
> Recv: Bed Topography Report…
-
I looked at the 2.1 Alfa and did download the mount. Am waiting for the final of 2.1 before I commit to final assembly. Also. after 3 successful prints last night, after replacing all Y axis rods and …
-
The G30 is supposed to probe one point and generate the Z offset. The stock FW actually did 2 probes and generated two results. M4MPMD probed once and generated one result. M1.1.x is probing the be…
see3d updated
4 years ago
-
This picture says it all.
https://media.discordapp.net/attachments/627988602269335568/639674827103273000/IMG_0850.jpeg?width=893&height=670
Essentially, the default tool's thickness limits the …
-
### Description
Note: This was working as expected in 1.1.4
Marlin 1.1.8
https://github.com/MarlinFirmware/Marlin/archive/1.1.x.zip
When doing step by step UBL, getting an issue where the po…
-
I know this is the same title as #12726, however I rather started a new issue for clarity as I made quite a few tests. It is also hard to decide if this is a [BUG] or [FR] for Marlin, however it is ce…
-
Since Marlin 1.1.8 (bugfix-1.1.x) I have issues with printing 90° corners. One day the problems were gone but now they are back again. As far as I remember I placed an bug report a few month ago...
…
-
### Bug Description
I am running the SKR mini E3 v2.0 with a BLtouch v3.1 and I am having problems with probing. Most of the time, probing is successful, but occasionally the probe fails to tri…
-
Felicity is reporting problems with her temperature sensor:
> ERROR - STOPPED
> Temp sensor
> Go to:
> ultimaker.com/ER01
That [error page](https://ultimaker.com/en/resources/19484-stopped-te…
-
When homing (G28) if X or Y fails to trip stallguard, the printer will hard-reset.
By far the easiest way to make this happen is with 0.9 degree motors and belts that are too tight or too loose. Y…