-
Checking the documentation, there is none for version 1.2. The motion controller mode also appears selectable via solder pads on version 1.0, but there is no reference as to where those pads are on t…
-
I purchased this board while it was sold out and received it in late october of the new batch 1.2s
I installed it as I followed the instructions. After a few days with the new board It sounded as …
-
hello
i try to make working neopixel ws2812b, i put 7 neopixel on th bottom of the hotend and 20 neopixel on the top 2020 profile
i use the pin PD5
i use a DC-DC Buck 24vdc->5vdc (12A[60W]) to …
-
Few feature ideas:
1. Filament controls:
Add extrude and retract controls to the filament menu with 1, 5, 10, 50mm and speed options
2. Filament preheat temperature presets:
Somet…
-
Hi My printer BIQU B1 when it starts gives me error (Bed leveling not enabled) then i get M117 ABL is enabled.
i don't have BL TOUCH or anything for auto bed leveling .
i have updated …
-
According to the latest marlin code compiled 512k file firmware.bin (bltouch and safe home) does not flash to SKR e3 mini v1.0
-
After updating the firmware on my B1 from 2.0.6.x to 2.0.7.x using both the provided firmware.bin file in this repo as well as my own compiled firmware from the source code in the B1-2.0.7.x branch fr…
-
### Description
I'm having a little trouble with NeoPixels. They seem to work, except they don't turn off when I issue a M150 command.
I added a [Adafruit NeoPixel 8 LED stick](https://www.adaf…
-
Edit: problem all fixed. I had broken stepper drivers, it all works fine now i replaced those.
-
cannot open source file "stdint.h"
cannot open source file "stdlib.h"
When trying to build in PIO