-
Hey guys :) So I bought a BLTouch for my Anycubic i3 Mega S and it has the Trigorilla v0.0.2 but the Guide has another Board version. In my case the pins are PS ; S1 ; S2 ; S3 ; S4 and not PS ; S0 ; S…
-
### Description
The first layer of my prints are often reported as .4mm Z height, regardless of actual layer height. For example I usually use .2 or .1mm slices. However during the first layer of a…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
- (I'm using UBL, w/ CR-Touch bed probe + ProUI on Ender-3V2 style printer)
When I start a…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
In the last month or so, I have been working to upgrade my Ender 3 printer. Replacing the mai…
-
hi, i recently bought a bd level sensor and did it what this page says: https://github.com/markniu/Bed_Distance_sensor/wiki/Installing-Bed-Distance-Sensor .When I try to auto-level with G29, it scans …
-
with SB2240 after 20/30 minutes of printing I get the error 'tmc "extruder" reports error : GSTAT: 00000004 uv_cp=1 (undervoltage!)
(Ldo nema 14 pancake run_current: 0.65)
both motor and board are…
-
Hi
I installed a BL Touch (from Antclabs) and the Micro Swiss Direct Drive Extruder Setup. Now i need to change the #define X_MIN_POS and #define Y_MIN_POS to #define X_MIN_POS -5 and #define Y_MIN_P…
-
https://user-images.githubusercontent.com/125172731/218293404-344c935e-803d-4f8c-b228-3e6e014cf1fc.MOV
https://user-images.githubusercontent.com/125172731/218293426-0a198a35-b233-48a1-a2f5-aa…
-
compilation terminate with error with a message 'no space left on device'
Context : Marlin 2.0.9.3 on Monster8 v1
see detail below
欢迎使用MKS Compile Toolhttps://www.baizhongyun.cn/home/mkscom…
-
It would be nice if the simulated marlin mode used 24bit color instead of the current 16bit. Setting the background and text colors by supplying a RGB hex value in the config.ini file and adding a men…