-
The Node.js server of CNCjs 1.9.5 may suddenly crash with an unexpected abort error caused by Socket.IO 2.0, especially when doing keypad jogging. Rolling back Socket.IO to 1.7.x will resolve this iss…
-
Hi cheton,
I really appreciate having an offline alternative for controlling my g2core/arduino due setup.
What I'm missing are some navigation buttons for the A-axis (+keyboard shortcuts and a 'ze…
-
Hello USBCNC,
I flashed an older hex file you provided [here](https://github.com/usbcnc/grbl/issues/1) on a blue pill STM32F103C8T6 board, installed ST's VCP driver and did a first test.
I streame…
-
I'm not sure if this is a bug or just my issue: when a job is finised the arduino is soft resetted, losing work coordinates. I'm using latest version.
-
I checked cncjs and i love it, here some ideas to make it better
- sometimes the console doesn't scroll in fullscreenmode
- put the input field on the bottom side or better emulate a console screen …
-
Hello, I have only just started using CNCJS today, and I have to say, I love it.
I primarily work in inch mode because.. thats what I do. The issue I have is when I switch to inch mode, the smooth…
-
I am very new to cnc so please bear with me. I just got my cnc built and the electronics set up and everything is communicating just fine (at least I think it is).
So I thought I would at first use a…
ghost updated
6 years ago
-
Hello,
i have a China 2417 CNC Mill/USB, Windows 10 64bit. First, sorry for my bad english :)
I like this Programm and i want to use it in the future. But first i am a noob ;) and..
I have a proble…
-
Using M7 (Mist coolant) and M8 (Flood coolant) on the same line will report a modal group violation error. I used to workaround this issue with separate lines, but I think Grbl should allow M7 and M8 …
-
I need to be able to run multiple files on the same work piece at the same coordinates and change tools between. (Using F-Engrave)
I haven't found a way to energize/lock motors so this can be done …