-
I have been trying to get Mesh Bed Leveling working since 1.1RC6. There have been a few issues opened that appear to have been fixed. It seems that MBL has evolved since some of the initial articles a…
-
Dear Developers,
my autobed leveling doesn't work anymore starting with RC2 (used release before). The Z- axis does run compensating motions but the compensation seems to be largely wrong. Printing o…
-
SW: OrangePi
HW: Atmega2560 + RAMPS 1.4
made all as manuals.
sucessfuly flash atmega
Klipper installed as user dsi
user included in tty and dialout groups.
when i start klipper see next:
===…
-
Hi,
Im new on Klipper Firmeware.
I installed Klipper on Arduino Due original. Im working with Repetier Server and not Octoprint. And set some settings on printer.cfg.
But I cant read the temp…
-
The RUMBA has 6 stepper ports
If I uncomment `//#define Z_DUAL_STEPPER_DRIVERS` in `Configuration_adv.h`, then the firmware only allows a single extruder.
``` cpp
#ifdef Z_DUAL_STEPPER_DRIVERS
#und…
-
Hi this is just first of all an informational request. I recently installed a BLtouch sensor and it went into error state when I ran G28 for the first time and it did the second zaxis (bed), bump, mov…
-
I have noticed that quad_gantry_level requires me to run through the quad_gantry_level process several times before the z motors are adequately level to the bed, with each iteration requiring less adj…
-
## Describe the bug
The hole used to secure the fan on the CoreXY back is missing a sacrificial layer.
## Actual behavior
The print ends up very ugly inside that hole when it tries to print witho…
-
This post is just a head up for everybody using Marlin on their 3D-Printers. Release Candidate #4 is getting very stable and the bug reports have dropped off to mostly being support questions. Ve…
-
### Version
2.3.0-rc2+win64
### Operating system type + version
Windows 10
### 3D printer brand / version + firmware version (if known)
Custom CoreXY Printer
### Behavior
When setting the…