-
### Cura Version
5.4.0
### Operating System
Windows 11
### Printer
Creality Ender 3
### Reproduction steps
1. Added g-code command to filament change (M600)
2. Change Filament
3. Manually Pur…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Was printing a gcode from octoprint installed on RPi and after 30 minutes, tasmota plugin that w…
-
### Bug Description
With Junction deviation enabled the printer decelerates and accelerates unexpectedly on smooth curves. `JUNCTION_DEVIATION_MM` is set to 0.017. There is no difference if I incre…
ktand updated
2 weeks ago
-
### Version
Slic3rPE-1.42.0-alpha1+win64-full-201812231738
### Operating system type + version
Win10 x64
### Behavior
* _Describe the problem_
I can move part in X and Y direction with t…
-
### Cura Version
5.6.0
### Operating System
windows 10
### Printer
Anycubic Kobra
### Name abnormal settings
oui
### Describe model location
oui
### Describe your model
non je ne l'avais pa…
-
**Question:**
In your FAQ there's a blurb about not supporting Macs with M-series chips.
I have an M2 Mac mini with Ultimake Cura v5.6 (the ARM64 version) installed and your plugin seems to work fin…
-
Bonjour et d’abord merci pour votre travail .
J'ai un soucis quand je veux transférer les fichiers test gcode de cura à mon imprimante et quelque soit le fichier j'ai l'erreur list index out of rang…
-
Hi! Richie Slocum made this observation:
From reading through the wiki, it seems like there are a few main categories of "toolboxes":
1. Mission Planning (simulation of cameras, overlay on google …
-
I would like to do set it up so that after slicing when choosing upload to the printer that I could select a printer to upload to. Right now it appears that you must activate a printer profile slice …
-
For my Snapmaker 2.0 I'm using Cura. I made a tiny cylinder but whenever it is printing the gyroid type infills, part of of it is printed at a crawling speed.
Here is the video:
https://user-image…